The complete cuff photograph is active; every chapter and action
remains available.
The cuff photograph is unavailable; the heading, actions, and
collection link remain available.
01 / Silhouette
Vanta Maison
One wearable open cuff, shaped in blackened platinum and edged
with a continuous channel of white diamonds.
The broad blackened-platinum wall holds a continuous open curve.
Its softened interior edge keeps the architectural profile
wearable against the wrist.
Setting / Diamond channel and retaining rails
03 / Setting
Light held at the edge.
White diamonds follow the cuff's outside edge in one precise
channel. Low retaining rails protect the stones while preserving a
clean line of light.
Finish / Satin face and polished edge
04 / Finish
Blackened platinum, quietly resolved.
A satin face absorbs most reflections. Polished borders and the
diamond rail carry the cooler highlights, leaving the full cuff
legible from opening to edge.
Each object begins with a plane, line, or joint. Scale is considered
across bodies rather than assigned by gender.
Showing all 6 pieces.
01 / 06
Signet / Design 01
Axis Signet
Silver + gold-tone
$1,400
02 / 06Finish visualization
Axis Signet / Noir variant
Axis Signet Noir
Blackened finish visualization
$1,650
03 / 06
Pendant / Design 02
Monolith Pendant
Brushed silver-tone
$3,200
04 / 06Finish visualization
Monolith Pendant / Black variant
Monolith Pendant Black
Dark finish visualization
$3,500
05 / 06Studio fitting only
Cuff / Design 03
Hinge Cuff
Silver + blackened channels
$9,700
06 / 06Studio fitting onlyFinish visualization
Hinge Cuff / Gold variant
Hinge Cuff Gold
Gold-tone finish visualization
$11,900
A still assembly file is active; every component specification and
fitting action remains available.
The live assembly model is unavailable; complete component plates
and specifications remain available.
Open cuff / Object 06
One complete cuff, resolved component by component.
The Hinge Cuff remains recognizable while its body, liner, finish,
setting, stone, and closure separate along one measured axis. Every
specification remains available beside the object, with or without
WebGL.
Architectural steel body carries the cuff's calibrated open
profile.
Body selected. Architectural steel body carries the cuff's
calibrated open profile.
00 / Assembly datum
Hinge Cuff / HC-06
Six customer-facing systems meet on a single calibrated
centerline. Select a component to inspect its fitted role.
The complete cuff remains legible while every component is
measured from the same assembly datum.
Envelope
61 x 48 x 32 mm
Tolerance
+/- 0.08 mm
Complete / open-cuff silhouette
01 / Body
Structural profile
Architectural steel body
A broad steel sweep carries the calibrated open profile and
joins the setting to both closure terminals.
Profile
61 x 48 mm interior
Band
32 mm architectural sweep
Tolerance
+/- 0.08 mm
Body / calibrated open profile joined to both terminals
02 / Liner
Wear surface
Flexible interior liner
The separate inner sweep follows the wrist with measured
clearance from the structural body.
Material
Flexible black liner
Clearance
0.01 mm modeled gap
Fit
Continuous inner sweep
Separated / five real component systems
03 / Finish
Protective shell
Directional satin finish
A finite rhodium shell registers light while preserving the
exact fitted geometry beneath it.
Grain
0.18 mm linear brush
Edge
0.35 mm polished break
Coating
Clear ceramic seal
Finish / satin shell registers light across the fitted cuff
04 / Setting
Structural cradle
Tapered four-prong setting
The tapered seat and four inward prongs transfer the stone
load directly into the cuff body.
Alloy
Rhodium-finished steel
Wall
1.4 mm nominal
Retention
Four-point prong cradle
The setting remains fixed to the upper body when every
structural offset returns to zero.
61 mm
48 mm
32 mm
Fitted / 61 x 48 x 32 mm envelope
05 / Stone
Optical insert
Calibrated white sapphire
A lab-grown white sapphire seats within the four-prong setting
and remains clear of both closure terminals.
Cut
Modified step / 8.2 x 6.1 mm
Seat
Four-point tension cradle
Clearance
0.22 mm perimeter
Stone / 8.2 x 6.1 mm sapphire seated with 0.22 mm clearance
06 / Closure
Articulated hardware
Calibrated hinge and receiver
The hinge and opposite receiver close the same open cuff while
holding its top plane in registration.
Travel
94 degrees
Pin
Blackened steel / 1.8 mm
Cycle test
12,000 operations
Closure / 94-degree hinge registered to the opposite receiver
Exploded construction / Hinge Cuff
Four layers. One continuous object.
Inspect the cuff as an assembly. The visual isolates one layer at a
time while the complete specification remains available below.
X / 00Y / 32
Selected layer01
Layer / 01
Protective outer shell
Brushed outer plates define the 32 mm band and shield the
flexible interior assembly.
Specification
Band width: 32 mm
Treatment
Directional silver-tone brush
Shell selected. Band width: 32 mm.
01 / ShellBand width: 32 mm
Brushed outer plates define the cuff profile and protect the
interior assembly.
Treatment Directional silver-tone brush
02 / CoreInterior opening: 61 × 48 mm
A flexible black insert lines the interior and separates skin
contact from the outer plates.
Treatment Dark ribbed contact surface
03 / HingeHinge articulation: 94 degrees
Twin articulated joints open the cuff while preserving alignment
across the top plane.
Treatment Contrasting blackened and gold-tone channels
04 / FinishSurface grain: 0.18 mm
A directional brush contrasts with blackened and gold-tone
channels at each join.
Treatment Linear brush with polished edge breaks
Object data / Fit protocol
Product specifications
A / Material language
Surface, not status.
The collection uses silver-tone, blackened, and gold-tone finishes
to articulate structure. Exact material details are confirmed for
each object before an order request is accepted.
B / Sizing
Measure the body, then the object.
Rings are requested by internal diameter. Cuffs and bracelets are
considered from wrist circumference and preferred ease. A studio
fitting is recommended for articulated pieces.
C / Care
Preserve the directional finish.
Store pieces separately and clean with a soft dry cloth. The
studio can review surface wear before any refinishing is planned.
Sizing reference for studio discussion
Object
Measurement
Available approach
Rings
Internal diameter
Requested in 0.5 mm steps
Core Bracelet
Wrist circumference
Three studio-fit openings
Hinge Cuff
Wrist profile and ease
Studio fitting only
Workbench / Joint alignment
Workbench / Assembly sequence 04
The joint is part of the composition.
A hinge is never hidden as a compromise. It is aligned, surfaced,
and given enough visual weight to belong to the object.
01 Establish the opening path
02 Align the outer planes
03 Resolve the contact surface
Studio fitting / By appointment
Fit is an architectural decision.
Share the object and how you prefer it to move. The studio will
reply with a fitting path and available appointment windows.
01 / 06
02 / 06
Finish visualization
03 / 06
04 / 06
Finish visualization
05 / 06
Studio fitting only
06 / 06
Studio fitting only
Finish visualization
Workbench / Joint alignment